| Model | Dimension (mm) | Outer Ring Mounting Hole | Inner Ring Mounting Hole | Inner Ring Mounting Hole | Basic Load Rating | Weight |
Supporting
Reducer
Model
|
|||||||||||||
| d | D | H | C | B | H2 | D1 | D2 | d1 | d2 |
Central D
dm
|
Mounting
Hole
Size
|
Central D
dn
|
Mounting
Hole
Size
|
Central D
dL
|
Mounting
Hole
Size
|
Cr | Cor | |||
| mm | KN | KN | Kg | |||||||||||||||||
| CSF(CSG）14 | 11 | 55 | 16.5 | 16 | 13.5 | 4 | 41.8 | 29 | 29.8 | 28.4 | 49 | 8-D3.5 | 23 | 6-M4 | 17 | 6-M4 | 7 | 9.1 | 0.15 | CSF14/CSG14 model |
| CSF(CSG）17 | 10 | 62 | 16.5 | 16 | 13.5 | 4 | 49 | 34 | 36 | 33.8 | 56 | 10-D3.5 | 27 | 6-M5 | 19 | 6-M5 | 7.6 | 10.7 | 0.24 | CSF17/CSG17 model |
| CSF(CSG）20 | 14 | 70 | 16.5 | 16 | 13.5 | 4.5 | 56.5 | 41 | 43 | 40.2 | 64 | 12-D3.5 | 32 | 8-M6 | 24 | 8-M5 | 8.5 | 13.4 | 0.3 | CSF20/CSG20 model |
| CSF(CSG）25 | 20 | 85 | 18.5 | 18 | 16.5 | 3.5 | 67 | 52.5 | 55.3 | 52.6 | 79 | 16-D3.5 | 42 | 8-M8 | 30 | 8-M6 | 13.8 | 21.6 | 0.45 | CSF25/CSG25 model |
| CSF(CSG）32 | 26 | 112 | 22.5 | 21.5 | 19 | 4.5 | 90 | 68 | 74 | 68.6 | 104 | 16-D3.5 | 55 | 8-M10 | 40 | 8-M10 | 12.5 | 35.6 | 0.9 | CSF32/CSG32model |
| CSF(CSG）40 | 32(24) | 126 | 24 | 22.5 | 21.5 | 4.5 | 105 | 86 | 86 | 81.2 | 117 | 20-D5 | 68 | 8-M10 | 50 | 8-M10 | 25.9 | 38.9 | 1.3 | CSF40/CSG40 model |
| CSF(CSG）50 | 40(32) | 157 | 31 | 30 | 28 | 5 | 131.6 | 103 | 108 | 102.6 | 147 | 16-D5.5 | 84 | 8-M14 | 60 | 8-M14 | 49.6 | 85 | 2.8 | CSF50/CSG50 model |
| CSF(CSG）65 | 52(44) | 210 | 39 | 37 | 35 | 7 | 176 | 132 | 138 | 132.6 | 198 | 20-D6.5 | 110 | 8-M16 | 80 | 8-M16 | 74.6 | 133 | 7.9 | CSF65/CSG65 model |
The CRBH series (inner and outer rings as a whole, ultra-thin) requires installation due to its ultra-thin design and the absence of mounting holes on the outer and inner rings to fix the flange and support seat. In addition, as both the outer and inner rings are integral structures, installation has no impact on performance, so it is possible to obtain stable rotational accuracy and torque, suitable for situations where the outer and inner rings rotate but require miniaturization in size.
More
RU series (integral inner and outer rings with mounting holes), as both the outer and inner rings have mounting holes, there is no need to fix the flange and support during installation seat. In addition, due to the overall structure of both the outer and inner rings, installation has almost no impact on performance, thus achieving stable rotational precision degrees and torques. Suitable for situations where the outer and inner rings rotate.
More
The dimension of the RAU series is completely consistent with that of the RA series, and its inner and outer rings are both integral structures, making it more convenient for installation and use.
MoreYiyang Advanced Manufacturing Development Zone, Luoyang City, Henan Province, China.
mark.hu@avebearing.com avebearing01@163.com
+86 15036588800
